Files
tertiary/Documents
William RickertandClaude Opus 5 a9e550e065 Add STM32F103 datasheet for the pin-number overlay
st.com blocks scripted download and its CSP blocks a browser-side fetch from
leaving the page, so this came from a mirror and is Rev 1 (preliminary, 65pp).
Verified it is the right document and that the LQFP48 pinout and every pin the
swap depends on are present. Flagged in the README as unsuitable for electrical
figures - pull the current Rev 20 by hand for those.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-27 14:26:26 -05:00
..

Datasheets in use

Only the parts this design actually depends on. The wider WCH collection — including the CH32X035 and CH32V203 docs used to rule out crystal-less USB — lives in ~/Documents/Projects/WCH CH ICs/.

File Part Why it's here
CH32L103DS0.PDF CH32L103C8T6 The MCU. Pinout, 64 K flash / 20 K SRAM, HSI accuracy table (§3.3.6), USBFS with 8 device endpoints (§1.4.20).
CH32L103RM.PDF CH32L103C8T6 Reference manual. USB clock path (§3.3.5.6), RB_UC_DEV_PU_EN internal 1.5 kΩ D+ pull-up, HSICAL/HSITRIM.
CH334DS1.PDF CH334R The hub. Variant feature table (which packages expose PSELF and port power switching), crystal-free caveats (§6.2), and the CH213 reference design for VBUS protection.
STM32F103x8xB_datasheet_rev1.PDF STM32F103C8T6 The pin-compatible escape-hatch MCU. Needed for the LQFP48 pin-number overlay against the CH32L103.

⚠️ The STM32F103 copy is Rev 1 (preliminary)

st.com refuses scripted download (HTTP/2 reset on curl; its CSP also blocks exfiltrating a browser-side fetch). This copy came from a third-party mirror and is the early preliminary revision, 65 pages — the current one is Rev 20 at ~117 pages.

For the LQFP48 pin numbering it is fine: that table has not changed since 2007, and PC13/PC14/PC15, OSC_IN/OSC_OUT, NRST, PA11/PA12, PA13/PA14 and BOOT0 are all present and verified in this copy.

Do not trust it for anything electrical — absolute maximums, timings, current consumption and errata have all moved since Rev 1. For those, pull the current datasheet by hand from https://www.st.com/resource/en/datasheet/stm32f103c8.pdf in a browser and replace this file.